产品中心您的位置:网站首页 > 产品中心 > 电容器、电抗器 > 无功功率补偿控制器 > CPR12,CPR5出口型无功功率自动补偿控制器

CPR12,CPR5出口型无功功率自动补偿控制器

更新时间:2024-01-04

访问量:1595

厂商性质:生产厂家

生产地址:

简要描述:
CPR12,CPR5出口型无功功率自动补偿控制器

CPR12出口型无功功率自动补偿控制器,CPR5出口型无功功率自动补偿控制器

General
  Power factor regulator performs the control and adjustment with full digits, it displays accurate and reliable readings of power factor, can’ t be affected for aging of electronic elements, Its oroper control calculation method can made the equipment, even the system of high harmonic content operate correctly. Because it has the ability of calculating the reactive reactivepower, the switching capacitor bank can adjust the power factor timely and clearly. Under equal rated value of capacitorband, the operation frequency and similar using frequency can be reduced greatly.
 
Set parameter
In the manual state press MODE key to set, the display indicates "SEt" 1s, which means that the regulator entersinto the state of SETUP.
Press MODE key to see parameters, when delay goes on, the delay time is set, the display indicated the setting data(s). Press"-" Key or "+" key to amend the parameters.
Press MODE key to set the next parameter, when LED2 goes on, the over voltage protecton value is set, the display indicates the setting data(V).
Press MODE key again, when 1 goes on, under current locking current is set, the display indicates the setting data(A).
Press MODE key again; when cos goes on, COS φ value is set, the display indicates the setting date.
When the last parameter is finished setting, please press MODE key again go exit SETUP and store all presetting parameters

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7